
PRODUCTS
of top quality

SERVICE
for every client

CREATIVITY
in every detail

DEADLINES
for yesterday
Printing house in Chișinău since 2001
Amprenta has been printing in Chișinău since 2001. We grew out of the publishing house Editura "Amprenta" SRL, and over the years we have brought everything a print job needs under one roof. Offset printing, UV varnish, foil stamping, die cutting and box gluing. Your order stays with us from the artwork to the finished box, no subcontractors.
Most clients come to us for packaging. That means cardboard boxes and micro-flute boxes, sheet-fed labels and POS materials. We also print marketing materials, catalogues, saddle-stitched magazines up to 164 pages, brochures and postcards.
Two Heidelberg Varimatrix 105CS die cutters cut board up to 1400 g/m² and corrugated board up to 4 mm thick. We have three foil stamping machines. Magazines are stitched on a saddle stitching line at up to 7,000 copies an hour.
Send us your artwork or just describe the job on WhatsApp +373 69 337 055. We will suggest the material and finish and work out the price of the print run.
Over
20000
Orders completed
OUR SERVICES
Offset printing
Offset printing is the traditional technology for full-colour printing. It gives very high quality at a reasonable price, and it works best on large full-colour runs.
Why offset
high quality, accurate colour and contrast;
a wide range of stock. Offset prints on many kinds of board, paper and other materials;
offset is a fast process;
it is cost-effective for posters and other items in medium and large runs;
colours can be adjusted during the run without changing the artwork. This matters, because any offset prepress takes time.

UV Varnishing
Varnishing is one of the most common finishes for printed products. It is popular because it decorates the print, creates unusual visual effects and protects the surface.
Varnish can be applied all over or as a spot varnish. All-over varnish covers the whole printed area, spot varnish highlights selected details. The varnish can be gloss or matt. Gloss makes colours brighter and richer. Matt varnish removes glare and gives the product an elegant look.
UV varnish can go on in a very thin or a fairly thick layer. It uses special resins that cure under UV light. Both matt and gloss UV varnishes are available. Glitter UV varnish has become popular lately. It contains sparkles of different sizes and colours, and depending on their amount, size and colour you can get very different visual effects.

Die cutting
Flatbed die cutting
Die cutting is a finishing process in which printed sheets of paper or board are cut to a set shape for later assembly. We have two high-precision Heidelberg Varimatrix 105CS die cutters. With 300 tonnes of cutting force they cut paper and board from 80 g/m² to 1400 g/m², and corrugated board up to 4 mm thick. Both machines strip the waste themselves, so the blanks come out clean and ready to use. This shortens production time and saves our clients time and effort.
Tunnel die cutting
Tunnel die cutting cuts a product along a complex closed contour on a hydraulic press, using blanks cut in advance. It uses solid thick-walled steel dies. Unlike flatbed die cutting, it cuts the whole stack of blanks at once rather than sheet by sheet. It is usually used for small items such as labels, neck labels, pocket calendars, business cards and cards.

Foil stamping / embossing
Foil stamping transfers an image onto paper or board under pressure, using special printing foil. A heated die presses the foil, the heat and pressure release it from its carrier, and it leaves a metallic print on the surface. Foil stamping makes the product look more expensive and refined, and it is often used on premium packaging. We have three foil stamping machines, so we can turn jobs round quickly. Embossing gives a raised or recessed image on the material. It is a type of stamping, which is why it is often called blind embossing. The material is pressed between a heated die and a counter die, and a raised image appears. Embossing is often used to lift logos or slogans, so they stand out and the product looks more elegant.
Saddle stitching / folding
Saddle stitching lines are fast automatic lines for brochures, booklets, magazines and other printed products held together with staples. The average speed is around 4,000 copies an hour and the top speed is about 7,000 to 8,000, so we can handle a run of any size on a tight deadline. In one pass the machine binds catalogues of up to 164 pages.
A folding machine folds printed sheets. We use it for flyers, envelopes, leaflets, magazines, brochures and more

Folder gluing
Automatic box gluing is one of the last stages of making a box, and how well it is done decides how the box performs later. Our equipment glues anything from simple straight-line boxes to complex crash-lock bottom boxes, which need special glue nozzles and folding attachments. Thanks to programmable glue nozzles, we can also apply glue in broken lines along one seam.

Laminating to board
Laminating to board is the process of gluing a thinner material, such as paper or board, onto a thicker base, such as paper, board, micro-flute or corrugated board. The result is stiffer, harder and more hard-wearing. Usually the thinner sheet, called the liner, goes onto stronger corrugated or micro-flute board. It can be done on one side or on both, depending on the result you need.

Film lamination
Film lamination covers printed products with film, gloss or matt. Gloss lamination gives an effect close to a gloss varnish, while matt film gives a soft velvety feel and removes glare. Lamination also makes the product stronger and protects it from moisture, damage and dirt.

Numbering
Numbering prints a sequence of changing numbers on printed products. Each copy in the run gets its own number, which never repeats, so any single copy can be identified. We use it for tickets, contracts, coupons, receipts and more.

YOUR IDEAS, OUR WORK!
Our team will always suggest the best way to bring your project to life
OUR CLIENTS
20 k
Projects completed
926
Clients
79560
Cups of coffee
2078
Questions answered























